Replace the Battery in your Game Cartridge! **56k warning**

[Master Kirby]

Hi Swinubisdabest, I live in the USA, though I don't think you need to be very experienced in soldering to replace a battery in a GSC cartridge. You could do it yourself, saving the trouble of sending your game to someone. If you get a battery that already has tabs attached, it should be a quick replacement. (You can purchase them from Digi-Key. http://www.digikey.com/ Search for part # P223-ND)

You just need to hold the iron so that its tip touches the lump of solder that holds the battery tab to the board. When you see the solder melt, you can use some pliers to pull the tab out of the molten solder.

When you want to put the new battery in, just lay it so that its tabs are resting on the solder pads (Make sure that the positive and negative polarities of the battery match up with the plus and minus symbols on the circuit card). When you hold the soldering iron to the end of the tab, the solder will melt and form to the tab. If you need to add solder, just touch some to the tab, and it will melt. When you see that the molten solder contains the end of the tab, and is touching the contact on the board, just remove the soldering iron and the connection will harden.

If you have access to a soldering iron, and can hold it steady without touching any other parts of the circuit card, you should not have any problems replacing the battery on your own. If you are worried about messing up, just practice soldering things together, or find a friend who could do it.